A table saw is by far the most popular tool on job sites and in shops for making rip cuts. A portable Jobsite table saw is essential for carpenters who do not only work in the shop. Here, we’ll look specifically at some of the best portable Jobsite table saws.
Small-saw offerings from a decade ago pale in comparison to today’s portable table saws. The machines have big cutting capacities, greatly improved safety features, and easy-to-setup attached stands.
Despite its simplicity, the reality is very different. What size should the table be? Which blade size should you use? What is the maximum weight you can make it?
If you’re new to woodworking or overwhelmed by the sheer number of choices you see online, you may find it difficult to find the perfect portable table saw. The following table saws were selected based on their class ranking.
I tried to make it as comprehensive as possible. As much as possible, I’ve gotten straight to the point. For your convenience, I will list all the models and give a brief introduction to each.
For Small Shop: DEWALT DWE7491RS
For Fine Woodworking: SKIL TS6307-00 10-inch
Best Overall: BOSCH 10 In. Worksite Table Saw
Top 7 Best Portable Jobsite Table Saws
Check out the following sections to learn more about table saws. Here are a few tips on how to select the best portable table saw for your jobsite, based on the pros and cons of the products.
1. DEWALT DWE7491RS 10-inch Jobsite Table SawCheck on Amazon
- 10-inch 24-tooth carbide blade
- Rack & Pinion telescoping fence system
- A 15.0A high torque motor
- 32-1/2-inch rip capacity
- A 2-inch dust collection port
With the new DeWalt 7491RS series, the 24-1/2-inch fence barrier has been breached, pushing the limits of contractor saws to the next level. You should choose the 7491RS series if you want portable transport combined with an impressive 32-1/2″ rip capacity and fully integrated storage.
This one is truly the best Jobsite table saw for small shop. The safety features it has are excellent. My recommendation is that you save up for a few days so that you can purchase this saw. There is a rather bulky design, and it costs around $600, but it is well worth it.
There is a tool on board for storing the wrenches, and the blades are easy to change. When looking for worksite table saws, choose the best one you can find. Having a cheap tool stop working in the middle of the day would be a disaster. It’s very easy to set up and pack up, and I appreciate the way everything stores onboard.
Having trouble attaching and removing the anti-kickback pawls from the riving knife isn’t as bad as I expected. It is extremely easy and reliable to control everything. Stand, legs, blade guard, fence, and belt are all released by simple mechanisms.
A DEWALT DWE7491RS table saw will undoubtedly exceed your expectations for the price. This saw is rock-solid once it’s in place. There is no side-to-side weighting, and the movement is not restricted in any way. In addition, I appreciated the versatility of the handle positioning.
2. SKIL TS6307-00 10″ Jobsite Table SawCheck on Amazon
- Rack & Pinion fence rails
- Micro-adjustment of blade
- Cuts between 2 positive stops
- Integrated folding stand
- Dust port elbow
In addition to a 15-amp motor, the SKIL TS6307-00 10″ jobsite table saw can rip boards 26-1/4″ wide. With its 15-amp motor, this hardwood cutter rips through hardwoods with ease. This also makes it the best portable table saw for fine woodworking on this list.
Rails on the rack & pinion fence provide fast, smooth, and accurate fence adjustments. In addition, it has a bevel capacity of 0-45° between two positive stops. The tabletop saw has a 10″ carbide blade with 24 teeth made of coated cast aluminum.
A folding stand is seamlessly integrated with the foldable legs, making it convenient and portable. Dust is systematically directed to a container through a dust port elbow. A safety switch prevents the table saw from restarting in case of a power outage. By aligning the blades parallel, the rip can be adjusted with ease fence.
For precise, accurate cuts, there is a miter slot. Get this portable table saw if you are looking for the best table saw for a small shop. This Table Saw can be used with Dado blades, which is one of its best features. Diablo 40 tooth blades are recommended for fine woodworking. A hot knife will slice right through 3/4″ plywood, and the edges will be cleaner than the factory ones.
The miter gauge is the only thing I dislike about the saw. I think it’s pretty cheaply made, and the tracks are playable. Despite this, everything else feels high quality and well thought out. There is secure storage for all accessories onboard. Installing and removing the guards is straightforward.
3. BOSCH 10 In. Worksite Table SawCheck on Amazon
- 5-Amp saw with 4.0 max HP
- Ideal for rip-cutting and crosscutting
- GTA47W Gravity-Rise wheeled stand
- Riving knife and anti-kickback pawls
- Soft-start circuitry
Worksite table saws like Bosch 4100XC-10 can take on any task, wherever you are. This saw features a professional rip capacity and a Wheeled Stand with exceptional portability. Featuring a 15-amps and a 4.0 HP rating, this saw is highly productive. It’s also considered to be the best portable table saw for home use.
In addition, it has a soft-start circuit that adjusts ramp-up speed smoothly and quickly. With constant response circuitry, the system maintains speed under load, prevents accidental startup and protects against overloads. The heavy-duty construction makes it ideal for job sites.
Designed for maximum trueness and comfort, the Square Lock rip fence can be operated with ease. For narrow workpieces, it includes an enhanced auxiliary fence. Featuring 8-inch wheels, the GTA47W is lighter and has a smaller footprint than the GTA45W.
Single-action design and treaded rubber composite tires make it easy to set up and transport. For ripping a 4-foot-wide sheet of plywood in half, the table saw has a 30-inch rip capacity and a 30-inch tabletop. Featuring a 30-inch ripping capacity and an increased work surface, the cast aluminum top is a great addition to any workspace.
The Bosch table saw is everything a table saw should be. It is elegantly done. Runs smoothly. It’s quiet. There is almost no vibration. With the cord storage area, you can fold and store the power cord much more easily.
It comes with built-in storage places for everything. I like the saw, but it feels cheap because of the excessive use of composite and plastic, but I understand the limitations.
4. Makita 2705X1 10″ Table Saw with StandCheck on Amazon
- 4,800 RPM for improved performance
- Powerful 15.0 AMP motor
- Large 25″ ripping capacity
- Smooth action rip fence
- Easy to read scale
The Makita 10-Inch Contractor Table Saw has a broad range of uses on and off the jobsite but is particularly useful for cutting wood in a shop. With a large capacity and a range of convenient features, the 2705X1 is a better choice. A range of professional applications is available with its 15 AMP power.
Transport is easy with this jobsite-tough stand. Precision-machined flatness and precision cuts are guaranteed from the moment you open the box. Right extension tables allow for greater cutting capacity and are capable of ripping plywood sheets that measure 4′ x 8′. 2705X1’s motor delivers 4800 RPM and 15 amps of power.
Designed to glide over flat table tops, the rip fence provides more precise adjustments. An easy-to-read scale and a big on/off switch are convenient features. Most commonly used accessories can be stored in the saw’s storage capacity. A durable, portable stand is included with the 2705X1.
The powder coat finish makes it durable and makes the wheels heavy-duty. It is easy to set up and fold for storage because it is spring-loaded. A dual slide guard lets you measure easily from the blade to the rip fence for accurate cutting setups. Precision machining ensures a flat, true tabletop for accurate cutting.
While the fence is not the best, I find it important to check everything twice as a novice. Generally, it’s consistently seated. I developed a little technique for pushing and pulling it for consistent seating. Having the fence pre-drilled for thru-bolts makes it easy to further customize for the router side using sleds and sliding jigs.
5. Delta 36-6023 10 Inch Table SawCheck on Amazon
- 32.5 Inch Rip Capacity
- Powerful 15 Amp Contractor Grade motor
- It can easily cut treated lumber and hardwoods
- Durable rack and pinion fence rails
- Fast, smooth, and accurate
In addition to having a 15 amp motor, this Delta portable table saw can rip 32.5 inches thick. Delta’s patented one-step folding stand and 559 square inch table surface ensure you have the stability to complete these large cuts.
This fence rail system produces accurate, fast, and smooth fence adjustments. A quick adjustment tab on each rail allows you to relocate the fence quickly. At the same time, ensure the fence and blade are parallel, so cuts are consistent and accurate.
Thanks to a 15-amp motor, it is highly precise, durable, and mobile. The rail and fence systems are made up of heavy-duty one-piece construction that makes precision cuts possible every time. You can cut narrow stock with the fence due to its special design.
At a 90-degree angle, the saw offers a 25-inch rip capacity, while at a 45-degree angle, it offers a 2-1/2-inch depth of cut. With the 2.5-inch port, you can easily connect a vacuum to extract dust from the work area. It is designed for the serious craftsman or professional user to cut after cut.
6. SAWSTOP 10-Inch Jobsite Table SawCheck on Amazon
- A patented safety system that protects your fingers
- Safer cutting of larger workpieces
- Active Dust Collection Guard
- The updated Jobsite Saw T-Style Fence
- Onboard storage
With design built for the jobsite, the SawStop Jobsite Saw Pro is durable, innovative and precise. New features have been added to the Pro model to keep up with the most demanding professionals.
Besides Active Dust Collection Blade Guard and versatile high-low fence, a deeper table is enhanced with other tools that make it easier and safer to work on the jobsite. An Active Dust Collection Guard is included to protect against the above-table dust particles that can cause health problems.
Kickback can also be prevented with the splitter and anti-kickback pawls attached. A single touch of the Ergolock will lock the Jobsite Saw Fence in place smoothly and securely.
Under the table, the under-the-table storage drawer serves as a container to house and protect accessories. The On-Demand shelf can be extended to provide additional support, and the fence face can be extended to provide a safer cutting surface when cutting thin materials.
With a simple, intuitive foot pedal, the mobile cart can be extended when in use and collapsed when not in use. Those who work on construction sites often have to deal with varying surface conditions.
7. Metabo HPT Table Saw, 10-Inch Carbide Tipped BladeCheck on Amazon
- 10-Inch 40-Tooth Carbide Tipped Blade
- Powerful 15 Amp motor with 4,500 RPM
- Featuring soft star and electric brake
- 35″ of ripping capacity
- Designed at knee level for immediate shutdown
A 15-Amp motor powers this 10″ job site table saw, which is designed to cut ripsaw, crosscut, and rip hardwood, plywood, and composite wood materials. All materials can be cut using this saw.
This fold and roll stand provides stability while in use and is designed with sturdy legs that make it easy to assemble and disassemble. Additionally, the stand is equipped with wheels so that the user can easily move across difficult terrain.
It has a telescoping extension table that can support a 35″ rip capacity to the right and can cut up to 3-1/8″ at 90 degrees and two-and-a-half inches at 45 degrees.
Any workshop or Jobsite will benefit from this user-friendly table saw. The rugged, stable fold-and-roll stand helps ensure accuracy and transportability while reducing wobble.
Best Portable Jobsite Table Saw Buyer’s Guide
You should keep an eye out for a few features when making a purchase of this magnitude. A good miter gauge is first and foremost what you want in your saw. To make your cuts easier, most modern saws come with a miter gauge that lets you adjust the cut.
Some portable table saws weigh as little as 50 pounds, making them lighter than stationary table saws. Wheeled job site stands are available on some models, which makes moving them easy.
When it comes to size, jobsite table saws are similar to benchtop models. Table saws used on construction sites differ from benchtop ones in that they are mounted on a rolling stand, allowing them to be wheeled from room to room.
With a light frame and sturdy wheels, the table saw can be moved easily on rocky paths or muddy terrain. The frame is designed to make it easy to transport. In order to understand this very useful power tool, let’s examine the different parts of a portable or Jobsite table saw.
As a result of the system’s stability, the stand had to be considered as well. Our cutting tables were extended as far as they would go, and we worked around to see how much movement would be expected during the cutting process. Getting the extension locks right was part of the equation.
If the lockdown is tight, there shouldn’t be much movement. You wouldn’t need to worry about locking down the saw if you were using it on a benchtop.
A solid stand is essential for a mobile contractor since they will be using it for many years. Due to the fact that many stands collapse and roll, this can pose a conflict of interest. Several people got it right, however.
In addition to being lightweight and compact, this Skilsaw was also the most stable. The stand has no wheels, and the outward-angled legs give it a wider platform than it might appear compared to its competitors.
Also offering an expansive platform, DeWalt placed second but with a slightly less rigid stand than Skilsaw. Third place went to Bosch, followed by Ridgid.
No professional class table saw had any problems associated with stability due to its extension locking. The whole thing took place in the stand.
It’s easy to hear the term accuracy thrown around, but we really need to narrow that down when looking for the best portable job site table saw.
Calibration should always be performed as soon as a saw is set up and should be the first step after that. It simply takes professional results to calibrate your new miter saw blade.
Table saws post-calibration are affected by two main factors: fence quality and overall stability. A fence clamps onto the edge of the table by grasping onto the edge. Three points of contact are what define the best fences, like Biesemeyer. You wouldn’t expect to find them there.
It is impossible to find any on the back due to the arrangement on the front. The front is pulled flush and self-aligns with a wide cast metal clamping system.
The fence must be locked in place so that it does not move during the cutting, but it is possible.
- SawStop has the best fence of all saws in the group, and it is the only saw using this fence style.
- Second place goes to Ridgid for its traditional front clamping fence system with a backside point of contact. Designed with a cast-iron wide clamp front plate, it impressed us with its solid construction.
- 3rd place went to DeWalt for its innovative lock-in system that locks your items into several points depending on where you need them.
By using a rack and pinion system, it stays in place while moving into place. There are a few issues with accuracy, but it eliminates many issues associated with some systems’ locks that are not square.
Portable table saws are essential for jobsite use and that means they are portable. There are a few important features that define portability.
In the beginning, weight is the most important factor when it comes to how easy it is to transport a saw, especially in the back of a truck instead of a trailer. The wheeled stand is the best companion for trailer owners. Both were examined.
Table Saw Blade
Since the stock blades for portable worksite table saws vary so greatly, it’s difficult to be objective in choosing one. If you’re looking to rip fast, a 24- to the 30-tooth blade will do the job. You will get cleaner results if you up your tooth count to 60 and higher for finish work.
Depending on how many blades you order, the total price will likely be as high as the saw itself. A blade investment, however, is an investment in safety and quality. Blades specifically designed for a single job will cut better and more safely than others.
The same blade cannot handle every type of lumber and every type of cut. If you want a chip-free edge on hardwood plywood, you use a different blade than one designed for rapid ripping in solid wood.
For the saw to reach its full potential, you must choose a variety of blades. Also, if you want to get the best jobsite table saw for fine woodworking, you will need to invest in blades.
The machine will likely come with a low-cost, all-purpose blade that will do rips and crosscuts, but neither extremely well. To ensure that you can easily cut hardwood, softwood, and plywood with and across the grain, you will need several more blades.
Blade Height And Bevel Adjustments
An amateur can also feel a difference in ease of adjustment between some saws and others when he or she looks around the table saw section at the home improvement store. The first approach tends to be easier, but the second approach tends to be more innovative.
Despite the value group’s overall win, Porter-Cable came out on top with intuitive adjustments that are smooth. You can adjust both the blade height and the bevel angle with the dual-adjustment wheels.
Secondly, SawStop had features that no other saw possessed. One full turn of the wheel adjusts the blade height across the entire range. Micro-adjustments were discussed for dado and rabbet cuts, but in practice, we found they were easy to reach.
By combining the bevel lock lever with the height wheel, SawStop does away with the bevel lock lever. You can easily change the angle of the lock by pulling it toward you. Holding the steering wheel doesn’t require a second hand to move the lever. Just let go and the wheel is locked back in place.
The Ridgid saw is the only one with an independent blade height lock, making it a third-place finisher. It uses multiple full turns to raise and lower, but it also has a lock in the center as opposed to most saws.
Tabletop Build Quality
Tables on budget table saws are not always perfectly flat, which is a common issue. This can happen as a result of warping over time, inadequate manufacturing processes, and shipping damage. Cast iron is usually the best material for tabletops.
Tabletops made of cast iron tend to be more durable, stable, and of higher quality. Tabletop flatness is rarely an issue with these. Aluminum tabletops are usually found on portable models.
Tables on compact table saws should be relatively flat, but don’t expect perfection. Plastic parts should be avoided in models. Using poor-quality materials to make a crooked table will prevent you from getting good results on your woodworking projects.
It is one of those features where the ends justify the means when it comes to stands. A portable design by Bosch stood out from the rest. The large-diameter tubing of Bosch stood out from the rest of the stands despite the common principles.
As a result, durability and ease of setup/takedown are improved, and the larger pneumatic wheels increase traction on less-than-ideal surfaces. The second most impressive wheel was from SawStop, which had narrower rims. Ridgid was third.
Skilsaw was at the bottom of the list for stand portability with no wheels but warrants mention, nonetheless. This stand attaches to the saw with two clips, has a wide base and solid construction.
If you’re going to transport it in the truck bed instead of on a trailer, this saw’s simplicity and lightweight will make it really attractive.
In order to determine the best portable jobsite table saw, two important performance factors needed to be considered: cutting power and dust collection. There is no doubt that power is the best option.
Making straight, clean cuts the right way does not have to take up our entire day. In order to get professional results, a particular saw needs to be babied more than others.
Some contractors don’t necessarily care about dust collection. If you’re a carpenter or remodeler working inside, this product is a necessity. There is no dust collector port on the Ryobi. Porter-Cable and Kobalt were almost identical and did an admirable job.
The U.S. consumer market generally provides table saws with a riving knife, anti-kickback pawls, and a split blade guard. These safety features are removable because some cuts can’t be performed with them.
Despite their differences, they can all be mounted on the saw without being installed. I would be remiss if I did not warn you that the cuts for which you may be at risk are more dangerous.
The inherent safety issues surrounding the table saw have been the topic of controversy in recent years. Using a technology developed by SawStop, the blade is pulled subsurface three milliseconds after it touches the skin.
As of June 1st, Bosch’s REAXX table saw becomes the first of its kind to compete. Both saws can perform the same tasks, but they deliver different results.
Advantages Of Compact Job Site Table Saws
Easy mobility is arguably one of the most recognized advantages of portable table saws. Mobile, easy-to-maneuver equipment, these saws are perfect for transferring between different job sites.
Portable table saws take up less space than stationary table saws. For small woodshops, this is perfect.
Small woodworking shops typically find these saws to be affordable and offer lots of options. Stationary saws are much more expensive than portable saws. Low-cost portable models are easy to find.
It is more energy-efficient to operate portable table saws. Powerful motors of up to 15 amps drive most models. An outlet that operates at 110 volts will be necessary.
It is usually the rip area for the saw that is the biggest drawback. The vast majority of people will not face this challenge unless they need to cut large pieces of wood.
You are likely to encounter this limitation on even the best table saws for the jobsite. Aftermarket fences can increase rip capacity.
In addition, you can complain about power. In spite of their powerful performance, portable table saws cannot compete with stationary models.
It’s a great machine to have a portable table saw. Dust and noise are kept outside and inside the house by using it wherever the work happens. These saws feature blades that are approximately 10 inches long, providing enough height above the table to handle thick lumber.
Motors normally run on between 12 and 15 amps to power that big blade. Thus, you should be able to cut and rip hardwoods, softwoods, and plywood with basic power. Next time you go to your worksite, be sure to choose the best portable jobsite table saw.