Dogs are our precious domestic animals. They wait for us at home until we come back and open the door. While we are away they are always on guard, no intruder will be left unharmed with their presence in the house, and when we come back, they are the happiest member of the household.
Loving a dog has its perks, maybe you do not love the shedding but it is not good enough to not have this joy of an animal that is a dog in your house. You can, however, build your dog a house out of pallets at a low budget cost and a little bit of handiwork.
How to Build a Dog House out of Pallets
Here are the processes step by step.
Before you start chopping up the woods you need to decide what design of a frame you want. Whether the is going to be the straightforward A-shape frame or what do you see as a roof over your loving dog’s head, maybe a custom slanted roof style.
2. Required Materials
Pallets are required since it is a pallet dog house. Then, of course, a measuring tape, you need to measure up your dog, even if he is a puppy, he is going to grow up, so in case you want his house to be long-lasting do consider his breed, whether he is a border collie or a German shepherd, just consider that.
A band saw or a handsaw along with the nail gun or claw hammer is needed for this project. The band saw is for shaping up the pallets and the hammer to join them. A special glue for woods and sandpaper to smoothen the surface.
3. Take the Accurate Measurement
Take a look around your house, where do you want to set the house for your dog? Whether the answer is the backyard or the garden, you should measure the space that it will be built on. You need to keep in mind about the breed of your dog and its size. We do not want the dog house to be too low or too narrow for our pets, they might just avoid hanging out for their specialized house altogether if that happens.
If you have a puppy maybe consider the investment as a long term one. Instead of just your puppy’s size consider his breed and estimate his adult size and build the dog house accordingly.
4. Make the Frame
Choose a design, there are so many designs free on the internet if you are a beginner just follow our instructions. Keeping the dimensions in mind you should start measuring the pallets and cut them into slants. It is a good idea to mark the pallets first before cutting them with a hand saw or a band saw so that there is no slope in the cut. It is important because they need to align perfectly. Using the slats of pallets you are going build pillars and cross beams.
Take a whole pallet board in combination with the plywood sheets. Make sure the plywood sheet has the same measurement as the pallet board.
5. Cut Accordingly
Keep the measuring tape and angled rule in hand and cut into the standard shape of the frames.
Settle into a design of the roof and porch because they need framing as well.
6. Join the Frames
Before joining the cut pallets to build the designed frame use the sandpapers to smoothen all the nooks and corners. We do not want our favorite animal to get nicks and cuts.
Now upon deciding the roof and porch ‘s alignment and height use the leftover planks and slats of pallets to make joining angle sturdy. Connect the pillars from the back with the front pillars to get a standing of the frame. After the pillars are standing on the base plywood, connect the roof frames to build the outline of the roof and porch over the pillars.
Do not forget the door. The point where the porch and roof and porch get connected is where you should add three extra cut frames the third one is for the door.
Attach the pillars from the porch to attach to the roof based pillars.
7. Staining The Frame
Inspect the joints thoroughly, after you are satisfied with the fram;s joint and strength ,start stining the frame, this coating is water-resistant to some extent and since the frame is the skeleton of the house it is a good idea to make it a long-lasting one
Stain the floor before you put up the walls.If there is any design you want to inside the room where your dog will lie down, do it now. Do not put down a carpet, because it tends to get dirty and will be hard to maintain.
8. Build the Walls
After you have set up the frames to test the stability it now time to build the walls. To build the walls the planks must be all squared up, or else we are not getting the perfect measure as the frames. Measure and cut one standard pallet for the wall and check that with structure and then saw the others with the help of that.
It is necessary to ready the attachments like nails and the wooden crossbeams beforehand because you will need to nail them together in the frame to build the wall.
9. Build the Roof
It starts just like the walls, it is better to start from the backside of the house, do the porch later. Leave the entrance door without filling up to make the doorway for your pet. The framework here is to support a slanted roof, which is a good idea because the rain and the snow will slide right off making it
10. The Entrance Outline
According to the height of your favorite doggo join the frames as the entrance door and fill the two sides of the entrance walls with the planks.
11. Finish the Porch
To make the porch roof fashionable you resize them before attaching them on the final frame. Put the flat slats of pallets accordingly to finish the house.
12. Stain the Dog House
After finishing the house, inspect for any rough surface. Use the sandpaper to smoothen the surface. Then coat the whole house with stain.
Whether it is to prevent shedding inside your house or not keeping the beloved pet alone inside for office hours, it is a good idea to build a dog house outside . That way your dog can enjoy the outdoors while guarding your house and you can be a happy pet owner.
We created another content on some beautiful dog house out of pallets‘ ideas. Hope you may like that.